產品詳情
  • 產品名稱:ProteinGAgaroseBeads

  • 產品型號:
  • 產品廠商:Exalpha
  • 產品文檔:
你添加了1件商品 查看購物車
簡單介紹:
ProteinGAgaroseBeads
詳情介紹:
Purpose Antibody Purification Reagent
Specificity This outstanding recombinant Protein G has the albumin binding domain deleted providing very clean immunoglobin purifications.
Characteristics LIGAND DENSITY: approximately 2 mg Protein G /mL of drained gel
DYNAMIC BINDING CAPACITY: approximately 18 mg human IgG/ml of drained gel (calculated as the amount of human IgG adsorbed to the gel before flow exceeded 1% of the absorbance of the ingoing solution at 30 cm/hr and a 0.92 mg/ml sample concentration.)
BEAD STRUCTURE: 4% highly crossed linked agarose
BEAD SIZE RANGE: 45-185 μm
MAXIMUM LINEAR FLOW RATE: >1300 cm/hr at 0.05 MPa (0.5 bar) in an XK 16/20 column, bed height 5 cm

MAXIMUM OPERATING BACK PRESSURE: 0.1 MPa (1 bar, 14 psi)
pH WORKING RANGE: 2-9 (Note: Protein G may hydrolyze at low pH)
pH STABILITY: long term storage and cleaning in place- pH of 3-9
CHEMICAL STABILITY: IgG binding capacity and recovery maintained after store for 7 days at
1) 37oC in 1M acetic acid (pH 2.0), 2mM sodium phosphate, 1% sDS (pH 7.0), 6 M guanidine- HCL, 70% ethanol or
2) 2 hrs at room temperature in 0.1 M HCL, pH 1.0, 8 M urea, pH 10.5, 01 M Glycine-NaOH, ph 11
PHYSICAL STABILITY: Negligible volume variation due to changes in pH or ionic strength
SANITIZATION: Sanitize column using 70% ethanol
ProductDetails: Bead Ligand Protein G
ProductDetails: Bead Matrix Agarose beads
ProductDetails: Bead Size 90 μm
Comment

Protein G is coupled to highly cross-linked agarose at 2?mg recombinant Protein G per ml beads using cyanogen bromide activation. The combination provides very superior performance binding 20?mg of human IgG per ml beads under static conditions. Binding under flow will be less depending on the flow rate for all Protein A and Protein G products. High flow rates are possible with this highly cross-linked agarose product under gravity flow, but it is not designed to pump under high pressure.

Restrictions For Research Use only
Format Liquid
Buffer Provided as a 50% aqueous suspension of Protein G in 20% ethanol solution.
Storage 4 °C
Storage Comment Product should be stored at 4-8°C.